PES Hot Melt Adhesive PowderTechnical Parameters:
| Property | Criterion |
| Appearance | White powder |
| Composition | CO-PES |
| Density ASTM D-792 | 1.20±0.02g/cm³ |
| Melt Point DSC | 100-120 ℃ |
| Melt Index ASTM D-1238 | 40±3 g/10min |
| Powder size range | 0-80 μm,80-170 μm. |
PES Hot Melt Adhesive Powder Technical Parameters:
| Bonding parameters (for reference only) | Temperature | 130℃ |
| | Press | 3.0 kg/cm2 |
| | Time | 14 S |
| Washing Resistance | 40℃ | Excellent |
| | 60℃ | Good |
Why Choose Us
1. We are environmentally friendly adhesive enterprises to ensure the environmental performance of raw materials
2. Own factory, efficient technical equipment, a number of production lines
3. Professional R & D team, set production, research and development, sales as one of the new enterprises
4. Service thoughtful, short delivery cycle
Characteristics
Tpu hot melt adhesive powder
1. Soft and good elasticity
2. Good viscous
3. Good fastness after washing, good solution resistance
PES hot melt adhesive powder
1. Use tobond single layer or multe layers
2. Good elasticity
3. Good fastness after washing or dey clean
PA hot melt adhesive powder
1. Easy to peeling
2. Good fastness after washing suitable forwashing at moer than 60 degrees ,
3. good Enzyme wash resistance
Storage Conditions :
1. The temperature is 20-30"C, the humidity is 45-55%, there is no ultraviolet light, and it is protected from light (light protection includes light and natural light) to avoid long-term contact with the air.
2. Hot melt adhesive powder is easy to agglomerate when damp, so unused powder should be sealed and stored.
3. Agglomeration is found during use, and it is filtered through a screen mesh. The stacking strength of materials should not be too large, and the stacking height should be moderate.
PES Hot Melt Adhesive Powder Application
DS206 is used in textiles and garments, automotive interiors, filters, shoe materials, heat transfer pastes, flocking pastes and bronzing pastes.
PES Hot Melt Adhesive Powder Customer feedback
PES Hot Melt Adhesive Powder Package
It can ship by DHL, UPS, TNT and FedEX. It will need 5-7 days at usual. Also can by sea and air.
300-500g free sample for you to testing, you just pay to the shipping fee.
| Packaging | 20KG / bag, packed in PE inner bag+kraft bag |
| Storage Conditions | Stored in dry unopened packaging at room temperature for 12 months. High temperature and pressure will cause agglomeration. The trays cannot be double-pressed. |
FQA
Q1). Do you provide free sample? And how many days it will take?
Yes, we can provide 0.3-0.5kg free sample, only need you to pay the shipping cost.
We will make the sample within 1- 2 working
days and it will take 3-7days on the transportation.
Q2). What is your lead time ?
2-7 days , depending on the quantity , we almost have safe stock ,
Q3). How do I pay for my order?
We accept T/T , Paypal and alibaba trade assurance order
